ಸಕರ್ ರಾಡ್ ಪಂಪ್ಸ್
- ತಾಂತ್ರಿಕ ವೈಶಿಷ್ಟ್ಯಗಳು
- ತಾಂತ್ರಿಕ ನಿಯತಾಂಕಗಳನ್ನು
ಮುಖ್ಯ ತಾಂತ್ರಿಕ ಲಕ್ಷಣಗಳು
● Rod pump is also known as insert rod pump, it is one type of the conventional sucker rod
pumps. The rod pump is connected to the sucker rod directly, it can be pulled out with sucker
rod and does not influence the tubing, so the well inspection and workover is more convenient.
It can save half times and reduce cost of the pumping test, thus the rod pump is suitable for the
● The rod pump can be classified into two types of mechanical seating and cup seating. Also it is
divided into three types as RHA (stationary heavy well barrel top anchor rod pump), RHB
(stationary heavy well barrel bottom anchor rod pump) and RHT (travelling heavy well barrel
bottom anchor rod pump)..
● Our rod pump is strictly conforming to API SPEC 11AX standard.
● Depending on the wall thickness of the barrel, the rod pump can be classified as either a thin
wall rod pump or a thick wall rod pump. We can supply these insert rod pumps according to
different requirements of customer’s.
|ಪ್ರಕಾರ||Nominal Dia. mm(inch)||Plunger Length m(ft)||Stroke m||Pump Constant m3/d||Tubing Thread||Sucker Rod size (inch)|
|20-125RHAC/M||32 (1 1/4)||1.2-1.8|
|25-150RHAC/M||38 (1 1/2)||1.64||2⅞||¾|
|25-175RHAC/M||44 (1 3/4)||2.24||2⅞||¾|
|30-225RHAC/M||57 (2 1/4)||3.69||3½||¾|
|20-125RHBC/M||32 (1 1/4)||1.14||2⅜||¾|
|25-150RHBC/M||38 (1 1/2)||1.64||2⅞||¾|
|25-175RHBC/M||44 (1 3/4)||2.24||2⅞||¾|
|30-225RHBC/M||57 (2 1/4)||3.69||3½||¾|
|20-125RHTC/M||32 (1 1/4)||1.14||2⅜||¾|
|25-150RHTC/M||38 (1 1/2)||1.64||2⅞||¾|
|25-175RHTC/M||44 (1 3/4)||2.24||2⅞||¾|
|30-225RHTC/M||57 (2 1/4)||3.69||¾|